Product Description
This skate deterrent is designed for walls and concrete structures with a 1/2-inch radius edge that does not form a 90-degree angle (may also be used in place of model FA902.5). Also suitable for most pre-cast concrete benches with a 1/2" radius edge.
Custom order available with: Hard Anodized Finish
Outside dimensions: are 3-3/4″ (top) x 1″ (face) x 2″ (wide).
Anchoring: Anchored with two offset thru-holes for SMART PINS PLUS anchors. Use anchors in conjunction with two-part epoxy.
Product Spacing: 18” from the end of planters/walls and approximately 36” centers. Do not apply at grout joints.
Available in kit sizes of 20, 60, 100, or 250 pieces
EPOXY NOTE (it is packaged in tubes of 50ml or 400ml): Orders of 100 Piece Kits will require the purchase of a reusable proxy applicator gun. With our smaller kits, we supply a 50ML two-part tube of adhesive as well as an adaptor for your caulking gun in order for the epoxy to be dispensed (one "adapter" is included in your kit at no charge). On orders of 100 pcs or more, the kit is packed with 400ml tubes of adhesive. This tube requires OUR special adhesive applicator gun (it will not work with any other applicator gun or caulking gun). Orders of 250 pieces will include a free applicator gun.
*PRODUCT DISCLAIMER*
This product is not to be installed on any pedestrian traffic surface. Parts may create a trip hazard that can result in serious injury or death